LEAD CORNICE

LEAD CORNICE

A multiple level lead cornice installed on a Grade II Listed Building in London. Each level of lead cornice is waterproofing the ledge below.

WHAT IS A LEAD CORNICE?

Lead Cornice is often used to cover existing architectural stonework or brickwork cornice on the exterior of a property. The cornice serves both functional and aesthetic properties.

Functionally, it helps channel rainwater away from the building’s façade, preventing water ingress.

Aesthetically, it adds a decorative touch to the building’s exterior.

Cornices are commonly used in classical and traditional architecture to enhance the visual appeal of the building’s façade.

WHY USE A LEAD CORNICE?

Waterproofing Capabilities

When used as a cornice weathering, lead sheet creates a watertight barrier that prevents penetration through joints, gaps and intersections in a building’s structure. 

Malleability

Lead sheet is highly malleable and can be easily shaped to fit the most complex architectural details, corners and irregular surfaces through traditional methods of bossing or lead welding. This makes it ideal for cornice applications where a bespoke fabrication is necessary to ensure effective protection against leaks and damp.

Durability

Buildings naturally undergo slight movements due to settling, expansion and contraction. Lead sheet is the perfect material to accommodate these movements due to its flexibility and strength which prevents stress and failure.

Sustainability and Recyclability

Lead is a sustainable roofing material as it is 100% recyclable. At the end of its long service life it will go through a recycling process that carries a low carbon footprint to then be manufactured back in to lead sheet for future use.

Cost Effective

Whilst the initial outlay for lead may be at a premium to alternative building products, lead sheet carries a material guarantee of 50 years from the manufacturers and when installed correctly can last for up to 100 years.

HISTORICAL PRESERVATION

During restoration of Grade I and Grade II listed buildings, using lead in a historically accurate manner is often mandatory as it contributes to the authenticity and cultural value of a building.

HOW LONG DO LEAD CORNICE LAST?

In optimal conditions, a well-installed and properly maintained lead cornice can last anywhere from 50 to 100 years.

One of the main properties that allows lead flashings to last so long compared to other building materials is its natural ability to protect itself from weather related stresses such as rainwater containing dissolved carbon dioxide which attacks the lead. The lead naturally forms a patina which is evident by white deposits on the surface of the lead sheet which over time thickens and prevents against further attacks.

WHAT CAUSES LEAD CORNICE TO FAIL?

There are four main reasons why lead sheet can fail as a roofing material and they are all components of improper installation which is why it is important to have your leadwork installed by a specialist who conforms to BS66915 code of practice for installing rolled lead sheet roof and wall coverings.

Bad Practice During Installation

Bad practice during installation is a generalised term for incorrect installation of lead sheet that does not conform to the British Standard 6915 . This is usually a result of a lack of knowledge from the installer who hasn't been trained in the recomended standards and minimum specifications for installing lead sheet.

Over or Under Fixing Lead Sheet

Over fixing and under fixing lead sheet refers to using an excessive number or using too few fixings to secure lead sheet. This can cause several issues:

Lack of Ventillation

Lead roofs should be ventilated to prevent corrosion caused by condesation. Whilst lead sheet is a durable roofing material and has been known to last for over 100 years - poor design can lead to issues. Condesation forming on the underside of lead roofs causes corrosion, whilst rain water creates a protective patina on the exterior of the lead, the underside is affected differently due to insufficient carbon dioxide.

Ventilation is essential for both warm roof and cold roof build ups, this can be achieved through multiple ways whether that is cross-battening the roof for through ventilation at the permieter or by installing lead roof vents that will be welded on to the bays.

Incorrect Code of Lead

The code of lead refers to it's thickness, there are six main codes of lead for roofing applications and this ranges from code three lead to code eight.

Simply put, the higher the code of lead the larger an individual bay size can be as the thermal movement it can endure is higher.

IMG_1766

WHY CHOOSE LISTED LEADWORK?

Between the Listed Leadwork team, we have installed countless tonnes of lead on roofing projects across London and surrounding counties. Our approach to Lead Roofing is a combination of traditional methodologies combined with the latest industry endorsed practices to guarantee a perfectly installed roof. 



We invite you to contact us in regards to your upcoming lead roofing project by using the contact form or the contact details below!

LISTED LEADWORK

CONTACT FORM